WEBVTT

1
00:00:00.000 --> 00:00:03.999
Open the right plugin
From the loaded plugin, open Configure. The selected server remains your target.

2
00:00:04.000 --> 00:00:08.999
Read the server configuration
The server and Backpacks 3.17.8 are recognised. The displayed values came from the server.

3
00:00:09.000 --> 00:00:12.999
Keep a starting copy
Export the JSON before changing the server settings.

4
00:00:13.000 --> 00:00:15.999
Choose when to send
Open Options to check this plugin’s send and reload settings.

5
00:00:16.000 --> 00:00:21.999
Separate sending and reloading
Automatic sending is off. Choose Manual under Reloading before continuing.

6
00:00:22.000 --> 00:00:25.999
Return to the settings
Reloading now shows Manual. Close Options to edit the backpack capacity.

7
00:00:26.000 --> 00:00:29.999
Edit the default capacity
Default capacity is 6. We will set it to 12; permission capacities stay unchanged.

8
00:00:30.000 --> 00:00:34.999
Check the new value
The form now shows 12. No file has been sent yet.

9
00:00:35.000 --> 00:00:38.999
Send the change
Apply prepares the files for the selected server.

10
00:00:39.000 --> 00:00:44.999
Confirm the transfer
Replaced files will be backed up. The plugin will not be reloaded at this step.

11
00:00:45.000 --> 00:00:50.999
The file has been sent
The transfer is complete. Reloading is still required, as the result indicates.

12
00:00:51.000 --> 00:00:54.999
Reload the plugin
Open Commands to access actions for the loaded plugin.

13
00:00:55.000 --> 00:00:58.999
Restart Backpacks
Restart reloads Backpacks only; it does not restart the Rust server.

14
00:00:59.000 --> 00:01:03.999
Confirm the reload
Confirm: Backpacks will read its configuration and restart.

15
00:01:04.000 --> 00:01:08.999
Reload confirmed
Plugin restarted confirms the reload. We will now check the configuration again.

16
00:01:09.000 --> 00:01:11.999
Check the result
Return to Configuration to check the saved value.

17
00:01:12.000 --> 00:01:14.999
Check the server values
In Options, Refresh settings reads the server file again.

18
00:01:15.000 --> 00:01:18.999
Read the current file
Refresh settings reads the remote files; it does not send them.

19
00:01:19.000 --> 00:01:23.999
Confirm reading the files
Reading replaces the form values; no file is sent.

20
00:01:24.000 --> 00:01:30.000
Value confirmed on the server
After reading the file, Default capacity is 12. Permission capacities are unchanged.